Controlling the Metasurface with the x/y pad of a Korg NanoPad

2 posts / 0 new
Last post
Sabbath Goy
Sabbath Goy's picture
Joined: August 15, 2009

Has anyone had any success in achieving this? I've given it a good go but I'm no expert at midi mapping and related endeavours so I've so far failed to do it.

Ross B.
Ross B.'s picture
Joined: April 11, 2009

You'll need to go to the Parameter Control window to access the X and Y parameters for the Metasurface. From there you can map the MIDI controllers. Check the help file for more info. Make sure you have MIDI control enabled on the toolbar.